Excellent H31-341-ENU Updated 2022 Dumps With 100% Exam Passing Guarantee [Q89-Q113]

NO.89 An OTN network uses WSMD4 to form a ROADM network element. After the logical fiber is created, the paths that can be directly searched are: (Multiple choice)

NO.90 Which of the following paths are not related to the business?

NO.91 Which of the following is not a function of RSVP-TE?

NO.92 Which of the following SOM systems is not monitored?

NO.93 What are the functions of MPLS-TP OAM? (Multiple Choice)

NO.94 The OSN 8800 device is protected by fan redundancy. When any fan in the fan box is broken, the system can still operate normally for a long time.

NO.95 Which of the following factors determine the optical signal-to-noise ratio (OSNR) of the receiving end to a certain extent? After a certain distance of signal transmission in the WDM system, the optical signal-to-noise ratio (OSNR) of the receiving end decreases to a certain extent. Which of the following is the main reason?

NO.96 Which of the following is the client-side logical port of a board in standard mode?

NO.97 What are the basic principles of MSTP device fault location? (Multiple choice)

NO.98 Before creating an optical cross-connection, you need to manually configure the corresponding port of the corresponding board as a boundary port, for example, the line-side port of the FIU board between two sites.

NO.99 What are the ways that NG WDM devices create fibers? (Multiple Choice)

NO.100 Which of the following is not included in an ASON network?

NO.101 For the nonlinear effect FWM, which of the following way is correct?

NO.102 Which of the following protections need to use the APS protocol? (Multiple Choice)

NO.103 Which of the following signals can be used as input or output signals of an external clock interface?

NO.104 Path method creates OCh failure, what are the possible reasons? (Multiple Choice)

NO.105 The following description of discrete services, which are correct? (Multiple choice)

NO.106 The single-fiber bidirectional WDM system uses only one fiber to transmit optical signals in both directions simultaneously. The optical signals in both directions should be arranged at different wavelengths.

NO.107 The following basic principles for fault location in WDM systems are (). (Multiple Choice)

NO.108 For an MSTP device, the service layer path is a path existing on the network management side, and the client layer path is a path existing on the network element side.

NO.109 In the scenario where the non-convergence OTU processes OTN standard signals, both A and B are WDM sites. After receiving the OTUk_TIM alarm on the client side, the OTU board at station A sends the OTUk_BDI alarm to the upstream. When the TIM follow-up action is disabled, the alarm is no longer transmitted to the downstream. When the TIM follow-up action is enabled, an SF event is generated. The WDM side of the OTU board at station B reports the ODUk_PM_AIS alarm, and the ODUk_PM_AIS alarm is transmitted downstream. The client equipment reports this alarm. After the WDM side of the OTU board at station B receives the OTUk_TIM alarm and the TIM follow-up action is disabled, the alarm is no longer transmitted to the downstream. When the TIM follow-up action is enabled, an SF event is generated. After the client side of station B processes the SF event, the client equipment reports the ODUk_PM_AIS alarm.

NO.110 Which of the following standards must be met for the isolation test in the feature test of the multiplexer/demultiplexer?

NO.111 The OTN circuit board (such as ND2) of OSN 1800V can respond to the status of the indicator light on the panel to reflect the optical power of the local end too high or too low.

NO.112 Before querying the error and optical power on the network management, you need to perform the () operation. Otherwise, you cannot query the corresponding teaching data.

NO.113 The optical and electronic shelves of the OSN 9800 are connected through the master-slave subrack cascading mode and connected through the GE 1/2 port on the CTu board.